Arria 10 SoC based System on Module and Dev Kit

iWave's Arria 10 SoC FPGA System on Module is based on the ARM-based Arria 10 SX family device with F34 package.

Arria 10 SoC SOMArria 10 SoC SOM

Bengaluru, Karnataka, April 10, 2017 /India PRwire/ -- iWave Systems, a leading embedded products & services company, launched the Arria 10 SoC FPGA System On Module. iWave's Arria 10 SoC FPGA System on Module is based on the ARM-based Arria 10 SX family device with F34 package. The module is equipped with 32-bit DDR4 memory support for HPS with optional ECC and 64-bit DDR4 support for FPGA. All the IOs and high speed transceiver blocks will be available on the SOM board to board connector.

Arria 10 SOC designed to meet the performance, power, and cost requirements of applications such as Test and measurement equipment, Control, and intelligence equipment, Diagnostic medical imaging equipment, Wireless infrastructure equipment, Compute and storage equipment and Broadcast and distribution equipment.

With compact 95mm x 75mm form factor, the Arria 10 SoC System on Module (SOM) supports 1GB DDR4 with optional ECC for HPS and 1GB SLC NAND Flash for HPS. The module is supported with 40°C to +85°C Industrial operating temperature and enabled with Linux 4.1.22 BSP support.

Arria 10 SOC FPGA System On Module (SOM) Highlights:

  • Arria10 SX SOC & GX FPGA compatibility
    • SX270, SX320, SX480, SX570, SX660
    • GX270, GX320, GX480, GX570, GX660
  • 24 high speed transceivers @ 17.4Gbps
  • Up to 76LVDS/152SE FPGA IOs
  • 64-Bit DDR4 support for FPGA
  • Variable IO voltage support
  • Industrial Grade operation

The specifications of Arria 10 SOC FPGA System On Module (SOM) are given below:

  • SoC: Arria10 SoC
    • Dual Core, ARM Cortex - A9 CPU @ 1.5GHz
    • SX270 (10AS027) FPGA Fabric
    • 35mm x 35mm F34 Package
  • Memory:
    • 1GB DDR4 with optional ECC for HPS
    • 1GB SLC NAND Flash for HPS
    • Optional 64-bit DDR4 for FPGA*
    • QSPI Flash for FPGA (Optional)
  • Communication:
    • 10/100/100 Ethernet PHY For HPS
    • USB2.0 transceiver for HPS UTMI
  • 240 Pin Board to Board Connector:
  • Arria10 SoC HPS IO interfaces:
    • Gigabit Ethernet x 1 Port
    • USB 2.0 OTG x 1 Port
    • SD (4bit) x 1 Port
    • SPI x 1 Port, I2C x 1 Port
    • Full Function UART x 1 Port
    • Console UART, GPIOs - 4 Nos
  • Arria10 SoC FPGA IO interfaces:
    • 24 high-speed transceivers
    • 76LVDS/152SE FPGA IOs
    • 8LVDS/8SE General purpose clock outputs
    • 7LVDS/7SE General purpose clock inputs
  • Headers:
    • HPS/FPGA JTAG, FPGA AS headers
  • Power Supply:
    • 5V through SOM B2B connectors
  • Temperature support:
    • -40°C to +85°C Industrial
  • OS Support:
    • Linux 4.1.22
  • Form Factor:
    • 95mm x 75mm

Note *: 64-bit FPGA DDR4 support available only for SX480/GX480 or higher devices

Notes to Editor

iWave Systems Technologies, an ISO 9001:2015 certified company, established in the year 1999, focuses on standard and customised System on Module/SBC product development in Industrial, Medical, Automotive & Embedded Computing application domains.


Journalists and Bloggers
Visit India PRwire for Journalists for releases, photos, email alerts and customized feeds just for Media.

If you have any query regarding information in the press releases, please contact the company listed in the press release itself. Please do not call India PRwire, we will be unable to assist you with your inquiry.


iWave Systems Technologies recent press release(s)


Arria SoC Dual-Core ARM Cortex A9 -Dev Kit

iWave Systems Technologies Pvt. Ltd., a leading embedded product & solution provider company, is planning to launch yet another System On Module (SOM) using Altera's Arria 10 SoC. This new system on module is an addition to the company's growing FPGA SOC SOM roadmap following to its earlier Altera Cyclone V SOC based SOM.

iWave's i.MX6 Qseven SOM is Microsoft Azure Certified for IoT

i.MX6 Qseven SOM is now pre-tested and certified to work with Azure IoT. The SOM communicates with Azure IoT hub through HTTP protocol. i.MX6 Qseven SOM.

Windows Embedded Compact 7 Board Support Package for Freescale(R) Semiconductor's Smart Applications Blueprint for Rapid Engineering (SABRE) Platform for Smart Devices based on the i.MX 6Quad processor

iWave Systems, a genuine embedded service provider, announces the official release of Windows Embedded Compact 7 Board Support Package (BSP) for Freescale(r) Semiconductor's SABRE platform for smart devices based on the i.MX 6Quad applications processor. The BSP includes the advanced features which enable the Original Equipment Manufacturers (OEMs) to quickly prototype the...