Services International will hold the International Ceramics & Ceramic Technologies Exhibition 2009 at Bandra Kurla Exhibition Complex for three days from February 26 (Thursday) until February 28 (Saturday) 2009, Mumbai, India. This is the third exhibition in this series since the first was held in March 2003.

FROM clay pipes for smokers, dinnerware, crockery, to tooth fillings and space shuttles, the ceramic industry has journeyed a long way. Ceramic is a versatile medium that is a harmonious blend of utility, design and artistic expression. Even in fine terracotta, history has been recorded on clay tablets. The Chinese began using ceramics 3000 years ago while in India, its origins can be traced back to 2500 BC. Ceramic materials are now used in the production of consumer goods like porcelain, earthenware, tiles, sparkplugs, drain pipes, sanitary ware and the like.

Ceramic artifacts and earthenware have been an indelible part of life right from the New Stone age. Apart from beautiful pottery and earthenware, many rituals and myths have led to extensive use of clay to make figurines of gods and deities. Ceramics also find sophisticated applications like protective tiles for space shuttles, bricks, in the cement and refractory industries, in electrical insulators, cutting tools and bearings used in industrial products, magnetic materials and computer memory packages in the electronics sector; high temperature tile insulation and composite materials in space technology, ceramic spark plugs used in aerospace industry, and fuel rods in generative nucleonic.

The previous exhibitions held in 2003 & 2004 that were hailed as a great success consisted of three days of exhibitions has proved to be an effective vehicle for showcasing the long-term, cost-effective benefits of ceramics for a wide range of uses.

In order for organizations and associations involved with the ceramics industry to work together to guarantee the success of the exhibition, We request that all concerned organizations and corporations consider supporting and submitting exhibits to the exhibition.

• WHO SHOULD EXHIBIT?

The key to the success of any exhibition or conference is the organizer's ability to attract a high quality group of directly interested visitors and delegates to the event. Ceramics & Ceramics Technology 2009 will benefit from Service International’s experience in the Ceramic industry through its expert knowledge of the sector, its association with the trade associations and close links to the world’s ceramic media to publicize the event world-wide. The follwing is the exhibitor profile;

Manufacturers of ceramic production equipments, raw material suppliers, suppliers of ceramic processing equipment, consumables and semi-finished products, materials and equipments for ceramic finishing ,suppliers of Inspection, Testing & Analysis Equipment, manufacturers of Finished Ceramics Products, relevant National & Regional Government Bodies, Ceramic printing ,artistic ceramics, industrial ceramics, ceramics in construction, electrial ceramics , ceramic accessories, medical ceramics, porcelain enamel products, Steatite, Glass ceramics, Ceramic pipes, Sanitary wares and roofing tiles. Ceramics (building , refractory, technical, electrial, superconducting, domestic and other kinds of ceramics), Used machinery , Semi-finished and auxiliary products, ceramic manufacturing technologies like energy saving , vitrification, design and engineering , pressing, forming and casting , lapping and polishing techniques, etc. Equipment and tools.

• WHY EXHIBIT?

Ceramics & Ceramic Technologies 2009 is one of the most effective medium for establishing and maintaining customer relations. In an increasingly digital age, they are the only media where buyer, seller and product physically come together - a potent force for business.

Connect Face-To-Face With Key Decision-Makers
With the many influential buyers in one location, this is your opportunity to:

• Meet with visitors from the India and overseas, and expand your customer base
• Present product launches, trends, product lines andinitiatives
• Promote your brand and raise your company profile within theindustry
• Develop business with existing customers aswell as source new contacts
• Maximize your revenue
• Market research for product development

Capture The Attention Of The Industry
As an exhibitor at Ceramics & Ceramic Technologies 2009, you are part of an aggressive, targeted marketing campaign consisting of direct mail, advertising, public relations, email and promotions to deliver qualified buyers and influencers to you.

A Three-Dimensional Media
Whilst an advert, direct mailing or web page may say a product is the fastest, quietest, smallest or most advanced on the market, at an exhibition, buyers can see, taste, touch and try your product for themselves. Nothing beats the impact of a live demonstration.

Fast Market Penetration
You can reach a large proportion of the market in a short space of time. Whether you are looking to raise your company profile, change market perceptions or generate sales leads, you can achieve more in three days at an exhibition than you might otherwise achieve in months.

• Parallel Event

The event showcases the latest products and most innovative design ideas in the kitchen and bath industry and the opportunity to network with thousands of industry professionals. Kitchen & Bath Asia 2009 is the international trade exhibition dedicated to the kitchen and bath industry bringing together national and international dealers, designers, architects, retailers, distributors, end consumers, home centers and many others industry professionals.

• PRODUCT SECTORS
  
  Engineering/Technical Ceramics
  Adhesives, Alumina products, Bearings, Beryllia products, Bioceramics, dental Bio Ceramics, medical, Boride products, Carbide products, Catalysts,Cermets Coatings, Coatings, boron nitride products, Composites, ceramic-metal Composites, Ceramic-polymer Composites, Cutters & knives, Cutting tools,Dies Engine components, Filters, Fuel cells, Glass-ceramics, Heat exchangers, Honeycombs, Industrial parts, Membranes, ceramic Nitride products, Nuclear waste containers, Oxide products, Recuperators Reinforcements,fiber Reinforcements, particulates platelets, Reinforcements, whiskers, Rings, Rods, Silicide products, Silicon carbide products, Stoneware & porcelain Thread guides, Tubes, Wear-resistant parts, Zirconia products.
  
  Industrial Ceramics
  Ceramic Machinery and Plants, Molding, Shaping, Drying & Firing Technologies, Laboratory and measuring equipment & quality control, Ceramics manufacturing Technologies, Equipment and tools for ceramics producing and processing, Used Machinery.
  
  Ceramics In Construction
  Brick for building facings, glazed Brick, load-bearing Brick, Murals Brick,Flue liners Pipe, Ceramic-lined Pipe, Glass-lined Pipe, Micro tunneling Pipe, Sewer Pipe, Slip-lining Sanitary ware, Terra cotta, Architectural, Thin brick Tile, Bath accessories Tile,Tiles for drain , floor , mosaic, paving, quarry roofing , split , structural & wall.
  
  Electrical Ceramics
  Antennas, dielectric Capacitors, Conductors, Crystals, Dielectrics, Diodes, Electrical porcelain insulators, Ferrites & ferromagnetic, Filters, dielectric Forsterite ceramics, High voltage insulators, Hybrid circuits, IC packages Insulators, Integrated passive components: R.C.L. Low voltage Magnets, hard, Magnets, soft, Oscillators, SAW Piezoelectric, Pyroelectrics Rectifiers, Resistors, solid-state, Resistors, thick-film, Resonators Semiconductors, Sensors, Spark plugs, Substrates, alumina Substrates, aluminum nitride, Substrates, glass Substrates, silicon carbide Superconductors, devices, Superconductors, microwave, Superconductors, wires Tapes, Thermistors, Transducers, Transformers, Ultrasonic ceramics, Varistors.
  
  Porcelain Enamel Product
  Appliances, Architectural product, Ceramic coatings,Thermal protective product, Cookware product, Plumbing fixtures, Antiques, Hard-fired ceramic tubing and rod.

  Accessories - Dinnerware/ Tableware/Sanitaryware/ Decoratives Items
  China, bone China, fine China, food service, Cookware, Earthenware, Casual dinnerware , square dinnerware , triangle dinnerware , trays . salad bowls , breakfast bowls , pasta bowls , jars , jugs , decorative plates , coffee mugs , beer mugs , cup and saucers , coffee sets , breakfast sets , ashtrays , candlesticks , vases , lamps , flower pots.

  Artistic Ceramic / Ceramic Printing
  Ceramic artware, Sculptures, Glass artware, Lighting, Ornamental artware, Potteryware.

  WHO SHOULD Visit?

  • Entrepreneurs, MNC’s, Industrialists, Traders, Sales Managers

  • Technologists

  • Engineers (Structural, Design)

  • Plant Personnel

  • Trade Channels (Importers/Wholesalers/Retailers/Agents/Distributors/End- Consumer)

  • Solution & Service Providers (Architectural, Consultancy)

  • Practicing Professional (Architects & Consultants, Researchers)

  • Trade Delegates (Merchants/Industry Suppliers/Investors/Specifiers)

  • R&D Professionals, Technology Developers

  • Professional Associations / Educational & Technical Institutes

  • Trade Publications

  • Contractors & local authorities
    

  WHY VISIT?

  There are many ways of sourcing product and supplier information, but only exhibitions allow you to put suppliers’ claims comprehensively to the test easily and cost effectively – by examining the products for yourself, questioning their creators, and comparing and contrasting their performance.

  See What’s New
  Ceramics & Ceramic Technologies 2009 is a recognized launch pad for new products, and an extremely time-efficient way to keep up to date with the latest innovations.
  
  Evaluate Products and Suppliers
  You can compile a wide range of competitive information on products and suppliers in a concentrated period of time. Research shows that decision-makers are more likely to name trade shows as an ‘extremely useful’ source of purchasing information than any other media.

  Keep Abreast of Industry and Market Developments
  Ceramics & Ceramic Technologies 2009 is a rich source of new ideas and applications and, as such, play an important role in strategic planning and business generation. Service International works closely with sponsoring trade associations and the media to ensure this event prove to be the forefront of developments.

  To Network/Develop Business Contacts
  Ceramics & Ceramic Technologies 2009 is a focal point for industry, attracting a broad cross-section of representatives, from buyers and sellers, to trade associations and the media.

  Other Common Reasons for Attending Exhibitions Include:

  • To consolidate business relationships
  • To solve specific problems
  • To find new markets
  • To appoint agents/seek principals
  • To discuss specific terms/conditions/pricing
  • To obtain technical knowledge
  • To discuss business needs in a neutral environment

  • Entrepreneurs, MNC’s, Industrialists, Traders, Sales Managers

  • Technologists

  • Engineers (Structural, Design)

  • Plant Personnel

  • Trade Channels (Importers/Wholesalers/Retailers/Agents/Distributors/End- Consumer)

  • Solution & Service Providers (Architectural, Consultancy)

  • Practicing Professional (Architects & Consultants, Researchers)

  • Trade Delegates (Merchants/Industry Suppliers/Investors/Specifiers)

  • R&D Professionals, Technology Developers

  • Professional Associations / Educational & Technical Institutes

  • Trade Publications

  • Contractors & local authorities

- End -

Welcome to Services International - the world's leading organizer of trade and consumer events…

Services International excels in creating high profile, highly targeted business and consumer exhibitions and conferences to establish and maintain business relations, and generate new business.

Services International is leading international exhibition organizer which takes pride in organizing maximum number of quality exhibitions in a year. We are committed to finding out what exactly our customer’s needs are and delivering solutions which exceeds expectations.

With more market-leading events than any other organizer, nobody delivers more business contacts than Services International. Please find our key industry sectors below:

•Disaster Management
•Fire Industry
•Anti terrorism, Police & Civil Defence (APC)
•Safety, Security
•Transport Security
•Water Management
•Screen and Digital Printing
•Glass Industry
•Kitchen and Bath
•Ceramics
•Fashion and Jewellery Design
•Biotechnology
•Tea, Coffee & Cocoa

ABOUT US

The best way to success globally is to give physical evidence of best of your product range and Services & Exhibition is only the way to do it.

Services International is a group of professional exhibition and conference organizers in India established in 1993. We are management consultants in the fields of exhibitions and conferences; specialists rendering professional consultancy in trade fairs and exhibition management. We take care of venue planning, financial control, documentation, press assistance, staffing, registration, liaison, technical support and social event related services.

The success of exhibition lies on the success of its exhibitors. This is the reason; we are identifying the right market, the right niche and the right opportunity for everybody.

Services International's prime objective is to provide high level standards to buyers and sellers and setting unmatched and unique industry standards. We take pride of holding maximum number of quality shows.

• We are:
  Exhibition & Conference Organizer
  Experienced over 10 years
  Internationally Associated
  Management Consultants
  Leader in the Industry
  
• We have:
  Worldwide Presence
  International Standards
  Experienced Professionals
  Show Managers
  Visualisers
  
• We do:
  Marketing
  Positing
  Conceptualization
  Media Relations
  Information Services
  Research & Development
  Corporate Communication
  Strategic Brand Reinforcement
  
  
• For more details visit oue website www.cctindiaexpo.com or contact Mr. Sumit Koul (+91-11- 45055599)/ Vivek Gupta (+91-11-45055573)